miguelbalboa/rfid: Arduino RFID Library for MFRC522 - GitHub
| RC522 Pin | Arduino Uno Pin | Proteus Net Label | | :--- | :--- | :--- | | SDA (SS) | Digital 10 | SS | | SCK | Digital 13 | SCK | | MOSI | Digital 11 | MOSI | | MISO | Digital 12 | MISO | | IRQ | Not connected | | | GND | GND | GND | | RST | Digital 9 | RST | | 3.3V | +3.3V (Uno's 3.3V out) | +3.3V | rc522 proteus library updated
After compiling in Arduino IDE, go to . In Proteus, double-click the Arduino UNO, browse to the .HEX file in the Program File field. Run the simulation. As soon as you click "Play," the virtual RC522 will read the pre-configured UID and display it in the virtual serial terminal. miguelbalboa/rfid: Arduino RFID Library for MFRC522 - GitHub
Modern library updates for the RC522 in Proteus focus on stability and peripheral compatibility. Here is what you can expect: As soon as you click "Play," the virtual
Provide a snippet showing how a "Valid Tag" (e.g., AB123456789A ) triggers a motor or LED.
: Some updated versions include a "Card Search" or "Tag" component that mimics bringing an RFID card close to the reader during simulation. Installation Guide
Previous versions (often from 2013-2018) had major flaws: they didn’t support the full MIFARE command set, crashed on PCD_AUTHENT , or failed to simulate multi-block reads. The introduces: