Autokent Mvci Multi Driver X64 Install -
: Many cracked diagnostic drivers are flagged as "false positives." You will likely need to disable Windows Defender temporarily. Step 1: Clean Up Old Drivers Conflicts are the #1 cause of installation failure. Unplug your MVCI cable.
Windows 7, 8, 10, 11 (64-bit) Device: AutoKent MVCI (J2534 / DoIP / CAN) Goal: Successfully install the multi-driver for diagnostic software compatibility. autokent mvci multi driver x64 install
: Choose the appropriate firmware version for your cable (usually v1.4.1 or v2.0.4 depending on your hardware chip). : Many cracked diagnostic drivers are flagged as
: Security software often flags these drivers as suspicious because they modify system registry files. Windows 7, 8, 10, 11 (64-bit) Device: AutoKent
Installing this driver often requires a manual approach since the standard .msi installers frequently fail on 64-bit versions. : Download the AutoKent MVCI Multi Driver package.
| Error Code | Message | Solution | | :--- | :--- | :--- | | | Unsigned driver | You forgot to disable signature enforcement. Reboot into the special startup settings. | | Code 10 | Device cannot start | USB power issue. Use a powered USB hub or change ports. Re-flash firmware. | | Code 28 | Driver not installed | Windows did not find the INF file. Manually select “Have Disk” and point to the .inf in the x64 folder. | | Device vanishes | Disconnects randomly | Bad USB cable. Replace with a shielded, short (1m) USB 2.0 cable. |
Open the (included in the Autokent pack) and click Device Info . If it shows the firmware version and "Connected," your installation is successful. 🚗 Step 6: Configuring Diagnostic Software Finally, point your software to the new driver. For Toyota Techstream: Open Techstream. Go to Setup > VIM Select . Select XHorse - MVCI from the drop-down menu. For Honda HDS: Go to F12 (Setup) . Select the Comms Interface as XHorse MVCI . ⚠️ Troubleshooting Common Issues