A USBasp, USB ISP, or an Arduino (using ArduinoISP). Wiring: 6-pin ISP cable or jumper wires.
An USBasp or an AVR ISP programmer is recommended. Some older guides mention using an LPT port programmer, but these are often unreliable on modern PCs . vcds atmega162 reflash
| ISP Connector | ATMega162 Pin | Function | |---------------|---------------|----------| | 1 (MISO) | Pin 6 | Master In Slave Out | | 2 (VCC) | Pin 10 or 40 | +5V (do not exceed 5.5V) | | 3 (SCK) | Pin 7 | Serial Clock | | 4 (MOSI) | Pin 5 | Master Out Slave In | | 5 (RESET) | Pin 1 | Reset (active low) | | 6 (GND) | Pin 20 or 30 | Ground | A USBasp, USB ISP, or an Arduino (using ArduinoISP)