: The device is designed for DIN rail installation (standard 18mm modules).
The Ic 2000 P retains the status of the last fault event even if the device is switched to the "OFF" position or if the building's main power is cut. Merlin Gerin Multi 9 Ic 2000 P Manual
Adjustable (approx. 20–80 seconds) to prevent flickering. Output: 16A switching capacity. Mounting: Standard DIN rail. 🔧 Wiring Setup : The device is designed for DIN rail
| Symptom | Likely Cause | Fix | |---------|--------------|-----| | Relay does not click when voltage applied | Coil voltage missing or wrong type | Measure A1–A2. Verify AC/DC matches label. | | Contacts chatter | Low coil voltage or loose wiring | Tighten terminals. Check power supply. | | LED on, but load not switching | Welded or worn contacts | Replace relay module (plug-in type). | | Overheating | Overload or poor termination | Reduce load current <6 A. | 20–80 seconds) to prevent flickering