Chery Spms V1 1 1 Setup Jun 2026

Windows XP, 7, 10, or 11 (compatibility mode may be required for newer versions).

V1.1.1 introduces refined permission sets. The setup prompts the administrator to define tiers: Line Operators (scan-only access), Quality Auditors (defect logging and rework flagging), and Shift Supervisors (KPI override and line stop authority). Misconfiguration here can lead to a production bottleneck, where operators cannot log a simple torque variance.

Step one: physical mount. She loosened the bracket, slid the module into the vibration-damped cradle, and tightened the screws just enough to let it resonate. Step two: power. She clipped the red and black leads to the bus’s auxiliary bus and watched the LED steady from blink to calm green. Step three: network.

Once inside, you can switch between different car models as needed to view specific parts catalogs. 4. Troubleshooting and Tips Compatibility: If the software fails to launch, try running it in Compatibility Mode for older versions of Windows.

(Spare Parts Management System) is an essential Electronic Parts Catalog (EPC) used by technicians, independent garages, and vehicle owners to identify and order genuine Chery components. Setting up V1.1.1 ensures you have the correct shell and database interface for modern and legacy Chery models, including the Tiggo and Arrizo series. 1. Prerequisites for Installation

| Issue | Likely cause | Fix | |-------|--------------|-----| | ECU not entering READY | HVIL open or BMS timeout | Bypass HVIL with 120Ω resistor | | Torque oscillation at low speed | Resolver offset incorrect | Re-measure using oscilloscope | | DTC P1B23 (checksum error) | Config tool version mismatch | Reflash with DiagPro, not 3rd-party tool | | CAN ID conflict | Duplicate IDs on bus | Remap using gateway configuration |